KOBE Red Line GES2506L 6.0mm Extended Spindle Die Grinder, 25,000 rpm | KBE2702040N Earth Clamp Tester Power 750 W or 1

Power   750 W or 1 HP Phase Three Phase Volt 440 V Discharge Size   1-1/2" (40 mm) Maximum Head  18 meters Maximum Flow 160 L/min

Cat IV 1000V Width

Restricted access adaptors: 25mm

1625nm) ±0

Model : GOA0525 (Automatic)

KOBE Red Line GES2506L 6.0mm Extended Spindle Die Grinder, 25,000 rpm | KBE2702040N Earth Clamp Tester Power 750 W or 1Model : KOBE KBE2702040N GES2506L For extra reach in 'hard to get at' areas, extended spindle housing allowing two handed operation, rear exhaust, safety lever throttle, 1 4" NPT air inlet thread for 10mm air hose, 90PSI air pressure, 4CFM* air consumption and an overall length of 248mm. Free speed: 25,000rpm. Vibration level: 5. 4 m s Sound power level: 103 dba. Noise Level: 93dBA Collet size 6mm. *Based on a 15 second cycle per minute average use.