Proximity Sensor - 8 mm Diameter, Shielded, Normally Closed - NPN Controls ) Hysteresis setting 3 to

) Hysteresis setting 3 to variable Self diagnosis Displays errors (sensor disconnection

WPC II - 12 VDC Aux

and should be secured into an M12 x 1 threaded hole with thread locker

The factory default is PNP

Control output Load power supply voltage: 26

Proximity Sensor - 8 mm Diameter, Shielded, Normally Closed - NPN Controls ) Hysteresis setting 3 toWintrss's 8 mm diameter shielded inductive proximity sensors are extremely useful general purpose die protection sensors. This sensor has a threaded housing, and should be secured into an M8 x 1 threaded hole with thread locker. If the sensor is to be removed from the die during maintenance, epoxy it into a removable bushing or insert. This inductive proximity sensor is Normally Closed, in other words, it actuates when metal leaves the sensing field,